Corrugated Sinusoidal Sheet Roll Forming Machine, Corrugated Sheet
|Item||Sinusoidal Corrugated Sheet Roll Forming Machine|
|Coil width||Custom-made, 1000mm or 1200mm or 1250mm|
|Yield Strength||250-350 Mpa|
|Material||PPGI, Color Steel, GI.|
|Decoiler / Uncoiler||Decoiler Type||Manual or Hydraulic or Auto Type|
|Coil Width||Max. 1250mm|
|Corrugated Sheet Roll Forming Machine||Forming Stations||16-18 Stations ( Depend on Profiles )|
|Roller material||45# steel, surface coated with 0.05mm hard chrome|
|Diameter of shaft||76mm|
|Shaft material||High grade 45# steel|
|Drive type||Chain transmission|
|Cutting To Length Device||Cutting type||Hydraulic cutting|
|Cutting Die Material||Cr12Mov steel, HRC58-62|
|PLC Electrical Control Box||PLC||PANASONIC Brand|
|Operation type||Touch screen & Button|
|Hydraulic Station||Hydraulic station||Famous Chinese brand|
|Suopport Tables||Table type||Simple nonpower type|
|Function||To support the finished corrugated panels|
|Decoiler / Uncoiler||1 Unit|
|Feeding Guide||1 Unit|
|Corrugated Roof Roll Forming Machine||1 Unit|
|Hydraulic Cutting System||1 Unit|
|Hydraulic Station||1 Unit|
|PLC Computer Control Board||1 Unit|
|Support Tables||2 Units|
Maintenance of Corrugated Roof Sheet Roll Forming Machine
Daily maintenance plays an very importance role in extending the
operation time and of corrugated roof sheet roll forming machine
and the good quality finished galvanised corrugated roof wall
panel. The following points should be part of the machine's daily
production and usage routine.
- Regularly lubricated the outside parts of the sinusoidal corrugated
roof sheet roll forming machine, such as the driving chain...
- Regularly brush the surface of roller, particularly when working
outside. If you do not use corrugated sheet panel forming machine
in a long time, you should apply luricating oil on the roller
surface, make sure you clean it for next time running machine.
- If the corrugated roofing sheet roll forming machine is not
operated in a long period, should cover it with plastic film, to
avoid getting rain or dust on the machine, or avoid the machine
becoming dampt, especially the PLC electric control board.
- Make sure the cutting system is lubricated when necessary.
- Check the Hydraulic station often and the oil quantity of the
deceleration machines, add more oil if the oil level is low.
- Check the electric appliances box and every leads conjuction
circumstance of the corrugated panel roof roll forming machine.
Reference Corrugated Profile Drawings
Photos of Corrugated Sheet Roll Forming Machine
Contact Us Freely